Solar Energy Basics

From the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy: these technologies harness heat from the sun to warm our homes and businesses in winter.

Solar panels installed on a home in Colorado.

Businesses and industry also use these technologies to diversify their energy sources, improve efficiency, and save money. Solar photovoltaic and concentrating solar power technologies are also being used by developers and utilities to produce electricity on a massive scale to power cities and small towns. Learn more about the following solar technologies:

1.Solar Photovoltaic Technology
These technologies convert sunlight directly into electricity to power homes and businesses.

Solar cells, also called photovoltaic (PV) cells by scientists, convert sunlight directly into electricity. PV gets its name from the process of converting Light (photons) to electricity (voltage), which is called the PV effect. The PV effect was discovered in 1954, when scientists at Bell Telephone discovered that silicon (an element found in sand) created an electric charge when exposed to sunlight. Soon solar cells were being used to power space satellites and smaller items like calculators and watches.

A large silicon solar array installed on the roof of a commercial building.

Traditional solar cells are made from silicon, are usually flat-plate, and generally are the most efficient. Second-generation solar cells are called thin-film solar cells because they are made from amorphous silicon or nonsilicon materials such as cadmium telluride. Thin film solar cells use layers of semiconductor materials only a few micrometers thick. Because of their flexibility, thin film solar cells can double as rooftop shingles and tiles, building facades, or the glazing for skylights.

Third-generation solar cells are being made from a variety of new materials besides silicon, including solar inks using conventional printing press technologies, solar dyes, and conductive plastics. Some new solar cells use plastic lenses or mirrors to concentrate sunlight onto a very small piece of high efficiency PV material. The PV material is more expensive, but because so little is needed, these systems are becoming cost effective for use by utilities and industry. However, because the lenses must be pointed at the sun, the use of concentrating collectors is limited to the sunniest parts of the country.
2.Concentrating Solar Power
These technologies harness heat from the sun to provide electricity for large power stations.
Many power plants today use fossil fuels as a heat source to boil water. The steam from the boiling water spins a large turbine, which drives a generator to produce electricity. However, a new generation of power plants with concentrating solar power systems uses the sun as a heat source. The three main types of concentrating solar power systems are: linear concentrator, dish/engine, and power tower systems.

Linear concentrator systems collect the sun's energy using long rectangular, curved (U-shaped) mirrors. The mirrors are tilted toward the sun, focusing sunlight on tubes (or receivers) that run the length of the mirrors. The reflected sunlight heats a fluid flowing through the tubes. The hot fluid then is used to boil water in a conventional steam-turbine generator to produce electricity. There are two major types of linear concentrator systems: parabolic trough systems, where receiver tubes are positioned along the focal line of each parabolic mirror; and linear Fresnel reflector systems, where one receiver tube is positioned above several mirrors to allow the mirrors greater mobility in tracking the sun.

A dish/engine system uses a mirrored dish similar to a very large satellite dish, although to minimize costs, the mirrored dish is usually composed of many smaller flat mirrors formed into a dish shape. The dish-shaped surface directs and concentrates sunlight onto a thermal receiver, which absorbs and collects the heat and transfers it to the engine generator. The most common type of heat engine used today in dish/engine systems is the Stirling engine. This system uses the fluid heated by the receiver to move pistons and create mechanical power. The mechanical power is then used to run a generator or alternator to produce electricity.

A power tower system uses a large field of flat, sun-tracking mirrors known as heliostats to focus and concentrate sunlight onto a receiver on the top of a tower. A heat-transfer fluid heated in the receiver is used to generate steam, which, in turn, is used in a conventional turbine generator to produce electricity. Some power towers use water/steam as the heat-transfer fluid. Other advanced designs are experimenting with molten nitrate salt because of its superior heat-transfer and energy-storage capabilities. The energy-storage capability, or thermal storage, allows the system to continue to dispatch electricity during cloudy weather or at night.
3.Solar Process Heat
These technologies use solar energy to heat or cool commercial and industrial buildings.
Commercial and industrial buildings may use the same solar technologies-photovoltaics, passive heating, daylighting, and water heating-that are used for residential buildings. These nonresidential buildings can also use solar energy technologies that would be impractical for a home. These technologies include ventilation air preheating, solar process heating, and solar cooling.

A transpired collector is installed at a FedEx facility in Denver, Colorado.

Space Heating
Many large buildings need ventilated air to maintain indoor air quality. In cold climates, heating this air can use large amounts of energy. But a solar ventilation system can preheat the air, saving both energy and money. This type of system typically uses a transpired collector, which consists of a thin, black metal panel mounted on a south-facing wall to absorb the sun's heat. Air passes through the many small holes in the panel. A space behind the perforated wall allows the air streams from the holes to mix together. The heated air is then sucked out from the top of the space into the ventilation system.

Water Heating
Solar water-heating systems are designed to provide large quantities of hot water for nonresidential buildings. A typical system includes solar collectors that work along with a pump, heat exchanger, and/or one or more large storage tanks. The two main types of solar collectors used for nonresidential buildings-an evacuated-tube collector and a linear concentrator-can operate at high temperatures with high efficiency. An evacuated-tube collector is a set of many double-walled, glass tubes and reflectors to heat the fluid inside the tubes. A vacuum between the two walls insulates the inner tube, retaining the heat. Linear concentrators use long, rectangular, curved (U-shaped) mirrors tilted to focus sunlight on tubes that run along the length of the mirrors. The concentrated sunlight heats the fluid within the tubes.

Space Cooling
Space cooling can be accomplished using thermally activated cooling systems (TACS) driven by solar energy. Because of a high initial cost, TACS are not widespread. The two systems currently in operation are solar absorption systems and solar desiccant systems. Solar absorption systems use thermal energy to evaporate a refrigerant fluid to cool the air. In contrast, solar desiccant systems use thermal energy to regenerate desiccants that dry the air, thereby cooling the air. These systems also work well with evaporative coolers (also called "swamp coolers") in more humid climates.
3.Passive Solar Technology
From the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy: these technologies harness heat from the sun to warm our homes and businesses in winter.

This North Carolina home gets most of its space heating from the passive solar design, but the solar thermal system (top of roof) supplies both domestic hot water and a secondary radiant floor heating system. | Photo courtesy of Jim Schmid Photography.

Passive solar design takes advantage of a building`s site, climate, and materials to minimize energy use. A well-designed passive solar home first reduces heating and cooling loads through energy-efficiency strategies and then meets those reduced loads in whole or part with solar energy. Because of the small heating loads of modern homes it is very important to avoid oversizing south-facing glass and ensure that south-facing glass is properly shaded to prevent overheating and increased cooling loads in the spring and fall.

ENERGY EFFICIENCY FIRST
Before you add solar features to your new home design or existing house, remember that energy efficiency is the most cost-effective strategy for reducing heating and cooling bills. Choose building professionals experienced in energy-efficient house design and construction and work with them to optimize your home`s energy efficiency. If you`re remodeling an existing home, the first step is to have a home energy audit to prioritize the most cost-effective energy efficiency improvements.

SITE SELECTION
If you`re planning a new passive solar home, a portion of the south side of your house must have an unobstructed [view" of the sun. Consider possible future uses of the land to the south of your site-small trees become tall trees, and a future multi-story building can block your home`s access to the sun. In some areas, zoning or other land use regulations protect landowners` solar access. If solar access isn`t protected in your region, look for a lot that is deep from north to south and place the house on the north end of the lot.